ISDN4Linux: Eicon Diva

ISN network and Linux, how?

Thu Mar 10 19:41:07 CET 2005
Copied from http://www.wurtel.cistron.nl/cards/diva.html

Eicon.Diehl Diva

The Diva 2.0 and 2.01 ISA and PCI are supported.

NOTE! The "PRO" cards are not supported. Those are active cards (with a processor) and no information on programming them is available.

Here is a Diva 2.0 ISA card ("PRO" is printed on the PCB, but apparently this is a non-PRO):

and a Diva 2.01 ISA card:

Configuration:
Diva ISA type=11 protocol=2 irq=X io=0xXXX irq and io according to isapnp setup
Diva PCI type=11 protocol=2 don't supply an irq or io, this is how the driver can see that a PCI card is to be used


© 1999,2001 Paul Slootman
May be used, copied and distributed freely, but my name, this copyright text, and the URL http://www.wurtel.cistron.nl/cards/diva.html must be kept intact. See it as a sort of GPL. Exception: Teles may only use this after express written or PGP/GPG signed permission.
Please send any changes and/or additions to me directly so that I can integrate them into my original document (if they are worthy).